Peristaltic Pumps - Pump - Portable - Tubing - Hose - ChemicalPurchase your peristaltic pump directly from RolaTec Pump Co. - Drop shipment services and wholesale prices for Qualified Distributors.

Peristaltic Pumps
Manufactured by RolaTec Pump Co.

RolaTec Pump Co.
855 Village Center Dr., #321
North Oaks, MN 55127-3016
Ph: 651-334-3250

Bench Top Peristaltic Pump - 7.0 LPM - 20 PSI
Discontinued - Repair Services Offered

  • Model MP-V450: Bench Top Peristaltic Pump
  • Silicone Tubing: 10 feet long, 3/8" ID x 5/8" OD
  • Detachable cord set for 120 VAC connection: 2.5 meters long, C-13 connector plugs to the pump
  • Registration Card for the Manufacturer's 2 year Warranty
  • Operator's Manual - Chemical Compatibility Chart
  • Free shipping and handling within the continental United States for ground delivery.
  • Standard pump has fixed rollers. It will cost $20 extra for a pump with Spring Loaded Rollers.
  • $160 Optional Remote Jack with 5 ft. cord to a Foot Switch for remote On - Off operation. Foot Switch easily connects and detaches from pump for normal operation.
  • Offer optional rotor configurations based upon desired line pressures and applications.
  • The Bench Top peristaltic pump has a universal power supply that accepts either 120 VAC or 240 VAC single phase connection.
  • Has a rotor with 4 rollers to progressively squeeze tubing to produce flow. Fluid travels through just the interior of the tubing without wetting other peristaltic pump components.
  • Some of the uses include dispensing inks, paints, glues, corrosive chemicals, sterile fluids, chemical dispensing and abrasive slurry transfer.
  • Variable Flow Control with a 90-450 RPM continuous duty drive. Accurate to within 10%
  • 25 feet of lift with 1/4" ID tubing, 15 feet of lift with 3/8" ID tubing.
  • Quick peristaltic tubing replacement. No tools are required. Simply insert tubing and close the hood. Spring loaded V-Clamps grip the exterior portion of the tubing to secure it during operation
  • Removable Rotor for cleaning.

Specifications

  • Universal Electrical Input: 220 VAC or 120 VAC, 60 Hz, 1.4 Amps, 1 Phase
  • 24 VDC Gear Motor: 1/10 HP, 450 RPM, Variable Speed
  • Size and (Weight): 9 1/2" x 10" x 10 1/2", (12 Pounds)
  • Percentage Dial for Flow Settings: 20% - 100%
  • Maximum Pressure: 20 PSI
  • Transfer Rate of Water at 20 PSI Head Pressure: Pumps 1.4 - 7.0 LPM using 3/8" ID x 5/8" OD Tubing, 0.7 - 3.5 LPM using 1/4" ID x 1/2" OD Tubing
  • Forward-Off-Reverse Switch: Switch has a hesitation center that prevents operation of the lever through the Off position until pressure is momentarily relieved.

Battery Powered Peristaltic Pump - 6.0 LPM - 20 PSI
Discontinued - Repair Services Offered

  • Model MP-V400: Portable Peristaltic Pump
  • Silicone Tubing: 10 feet long, 3/8" ID x 5/8" OD
  • Detachable cord set for 120 VAC connection: 2.5 meters long, C-13 connector plugs to the portable unit
  • Registration Card for the Manufacturer's 2 year Warranty
  • Operator's Manual - Chemical Compatibility Chart
  • Free shipping and handling within the continental United States for ground delivery.
  • Standard pump has fixed rollers. It will cost $20 extra for a pump with Spring Loaded Rollers.
  • $160 Optional Remote Jack with 5 ft. cord to a Foot Switch for remote On - Off operation. Foot Switch easily connects and detaches from pump for normal operation.
  • Offer optional rotor configurations based upon desired line pressures and applications.
  • The portable peristaltic pump is powered by an internal battery or 120 VAC connection. Battery is quickly charged when plugged in and switched OFF.
  • Max flow is 6 Liters / Minute.
  • The pump will operate for 40 minutes on a single charge at max flow rate. Requires just 30 minutes to recharge the battery.
  • RolaTec hose pumps have a rotor with 4 rollers to progressively squeeze tubing to produce flow. Fluid travels through just the interior of the tubing without wetting other peristaltic pump components.
  • Some of the uses include shallow well sampling, dispensing inks, paints, glues, corrosive chemicals, sterile fluids, chemical dispensing and abrasive slurry transfer.
  • Variable Flow Control with a 80-400 RPM continuous duty drive. Accurate to within 10%
  • 25 feet of lift with 1/4" ID tubing, 15 feet of lift with 3/8" ID tubing.
  • Quick peristaltic tubing replacement. No tools are required. Simply insert tubing and close the hood. Spring loaded V-Clamps grip the exterior portion of the tubing to secure it during operation.

Specifications

  • Electrical Input: 120 VAC, 60 Hz, 1.4 Amps, 1 Phase
  • Rechargeable Battery: 12 V, 7.2 Ah, Sealed Lead Acid
  • 12 VDC Gear Motor: 1/10 HP, 400 RPM, Variable
  • Size and (Weight): 9 1/2" x 10" x 10 1/2", (17 Pounds)
  • Percentage Dial for Flow Settings: 20% - 100%
  • Maximum Pressure: 20 PSI
  • Transfer Rate of Water at 20 PSI Head Pressure:
    Pumps 1.2 - 6.0 LPM using 3/8" ID x 5/8" OD Tubing,
    0.6 - 3.0 LPM using 1/4" ID x 1/2" OD Tubing
  • Forward-Off-Reverse Switch: Switch has a hesitation center that prevents operation of the lever through the Off position until pressure is momentarily relieved.

Patented Pump Head Enhances Product Performance

  • Patented pump head (US Patent # 5,110,270) increases tubing life, bearing life and over all efficiency of the Portable Tubing Pump.
  • Is self priming with a maximum lift of 25 feet making it excellent for collecting samples from barrels, tanks and wells. Meets EPA flow requirements of at least 2 feet per second transfer velocity
  • Delivers 0.6 - 6.0 LPM depending upon ID of the tubing and flow setting.
  • Standard rotor will maintain set flow rates up to 20 psi head pressure for 1/8" wall tubing.
  • 8.0 Ah sealed lead acid battery that can provide enough energy to transfer 6 LPM of water for 40 minutes at room temperature.
 
  • Takes only 30 minutes to charge the internal battery. Circuitry senses a fully charged battery and limits excessive current. An indicator light displays rapid or float stages of charging.
  • Fan cooled aluminum enclosure with a powder coated paint finish. The unit is vented on the bottom so is only splash resistant from above.
  • Optional Pump Head with Spring Loaded Rollers that will accept tubes with 1/16" to 1/8" wall thickness. Used for low pressure fluid transfer applications, where battery life is critical. Increases battery operation from 40 minutes to 45 minutes and the pump will operate in a quieter manner. (Add $20.00 to the total price of package)
RolaTec Pump Co.
855 Village Center Dr., #321
North Oaks, MN 55127-3016
Ph: 651-334-3250
morrick@rolatecpump.com

Back to the Top

© Copyright 2003 - 2023 RolaTec, All Rights Reserved